• Registered: 10-10-2010
  • Posts: 3

Topic: Glue Drone back together

My outdoor case broke in two pieces (at the nose). What glue do I buy to glue the styrofoam (?) back together?

  • From: Southampton, UK
  • Registered: 08-21-2010
  • Posts: 238

Re: Glue Drone back together

Use foam safe CA Glue and get activator as well. It'll save you time on waiting.

Check out a LHS for Zap CA Glue and activator.

Glue the area, attach the broken part then spray around the crack with the activator, keep hold of it for about a minute for the activator to work, after that you can fly but personally I would leave it over night to ensure it's fully cured.

Check out  http://www.ardrone-flyers.com  for more AR Drone info and helpful content.
AR Drone Wiki for more information - http://www.ardrone-flyers.com/wiki/

symon's Website

3 Reply by fredz (edited by fredz 10-11-2010 10:07:08)

  • Registered: 10-10-2010
  • Posts: 3

Re: Glue Drone back together

I glued it back together with simple Bison Power Glue ("secondelijm") Industrial. Took 2 minutes ;-)

http://www.bison.nl/upload/af993e0fc2c7dd2dc07c7d.gif

  • Registered: 09-21-2010
  • Posts: 16

Re: Glue Drone back together

What ever you use don't use any of the crazy type glues, I did and it melted the foam.

  • Registered: 01-27-2012
  • Posts: 15

Re: Glue Drone back together

Hobby Lobby has  "foam glue" sticks for a hot glue gun. It works like magic and you can't see the repair.