Topic: Minikit round knob won't select menu options
If you press knob and turn and can't hear menu options then the connection of the knob to the circuit board has probably fractured. Small car owners beware .... banging your forehead on the Minikit knob will eventually do this ...position out of reach. If your Minikit is out of warranty and you can't send it in for repair and you have skills in fiddly electronic DIY you can open Minikit thus: Pull and slide off retaining clip,remove 2 retaining screws with suitable screwdriver and lift off knob surround collar..... remove two rubber feet at other end and scrape away wax/plastic covering.... remove screws. P.S. Your Warranty is now null and void! Gently open and lay on table-avoid severing fine speaker connector wiring. Inspect mounting of knob component - ignore double entendres- look for fractures of the metal connectors to the motherboard and resolder. Take care not to damage wiring connections to mini microphone by mount. Test whilst open carefully!-don't short out circuitry- turn on device, press button and listen to restored menu options... voila .... enjoy!