Sending Phonebook from vCast phone evo

For Vcast phones having problems sending contacts to the Parrot Minikit or
CK3000 evo the following steps must be completed for the transfer to be
successful:
1. From the kit turn the dial and select “Add Voice Tags”
2. Press the knob and kit will announce “Awaiting a Contact”
3. The kit will disconnect from your phone
This will disconnect the phone from the Kit. Next, from the phone do the
following steps:
1. Select MENU
2. Select SETTINGS & TOOLS
3. Select BLUETOOTH MENU
4. Select the PARROT
5. Select OPTIONS
6. Select REMOVE DEVICE
7. Select YES to remove the device
8. Select ADD NEW DEVICE
9. Select the PARROT
This will allow the phone to find the kit with the Object Push Profile activated.
The phone will now know that this is an available function of the kit. The phone
can now pair to the kit:
1. From the phone, enter 1234
2. When asked to connect to Parrot select NO
The phone will now be able to push contacts over to the kit. This can be done
with the following steps:
1. From the phone, select the PARROT in the Bluetooth menu
2. Select OPTIONS
3. Select SEND NAME CARD
4. Select the CONTACT
5. Select DONE
6. Select OK
7. The PARROT will ask you to “SAY THE CONTACTS NAME AFTER THE
BEEP”
8. The first time the PARROT will ask you to record the corresponding
keywords
9. Repeat steps 1-7 until you have sent all of your contacts to the Parrot,
ensuring not the Reconnect